<bdo id="as1n4"></bdo>

<option id="as1n4"><nobr id="as1n4"><address id="as1n4"></address></nobr></option>
  • <tbody id="as1n4"></tbody>

    1. 歡迎來到四川巨浪智能設備有限公司! 收藏網站 | 在線留言 | 關于我們 | 聯系我們
      熱門關鍵詞: 產品名稱 產品名稱
      您當前所在的位置: 首頁 > 微波烘箱系列 > 微波烘箱系列產品
      微波真空干燥箱
      0
      微波真空干燥箱
      Microwave vacuum drying oven

        工業生產中,有許多物品是不能在高溫條件下進行干燥處理的,例如一些藥品、化學制品、營養食品以及人參、鹿茸等高檔中草藥材,特別是對中藥浸膏的干燥更具有高質量、高效益的特點,為了保證產品質量,其干燥處理必須在低于100℃或在室溫的條件下進行,眾所周知氣壓降低,水的沸點也降低,如在一個大氣壓(101.3kpa)下,水的沸點是100℃,而在-0.073mpa(7.37kpa)下,水的沸點是40℃,而在-0.09mpa下,水的沸點33℃,可以實現在低溫下對物料進行干燥,因此,在真空條件下,加熱物體可使物體內部水分在無升溫狀態下蒸發,從而達到較好的干燥效果。
        High-temperature drying does not apply to many objects, such as medicine, chemicals, nutrients, as well as the Chinese herbal medicine such as ginseng and velvet antler, during the industrial production; it enjoys the features of high quality and benefits in the drying of Chinese medical extract. The drying must be performed under 100℃ or at room temperature, in order to guarantee the quality of products. It is well known that water boiling point decreases along with the air pressure; for example, the water boiling point is 100℃ at the atmospheric pressure below 101.3 kpa, 40℃ at the atmospheric pressure below -0.073 MPa (7.37kpa), or 33℃ at the atmospheric pressure below -0.09 MPa, in order to realize material drying at low temperature; therefore, the moisture in the heated object can be evaporated in vacuum condition without temperature rise, to ensure good drying effects.



      序號
      S/N
      型號
      Model
      工作室mm
      (寬*深*高)
      Work Chamber mm
      (W*D*H)
      工作溫度(℃)
      Work Temperature (℃)
      電源
      Power Supply
      溫度均勻度(±℃)
      Temperature Uniformity (±℃)
      最大真空值
      Max. Vacuum Value
      真空泵接口
      Vacuum Pump Interface
      通大氣接口
      Air Feeding Interface
      氮氣接口
      Nitrogen Interface
      1 HW-BMH-C1253225-C30 250*320*250 室溫~300 三相380,50Hz ≤1 1-10Pa DN25 KF接口 軟管接頭Φ4 可選
      2 HW-BMH-C1325032-C30 320*500*320     ≤1 0到-1Pa DN25 KF接口 軟管接頭Φ4 可選
      3 HW-BMH-C1475047-C30 470*500*470     ≤1 0到-1Pa DN25 KF接口 軟管接頭Φ7 可選
      4 HW-BMH-C14710047-C30 470*1000*470     ≤1 0到-1Pa DN25 KF接口 軟管接頭Φ7 可選
      5 HW-BMH-C1657565-C30 650*750*650     ≤1 0到-1Pa DN25 KF接口 軟管接頭Φ13 可選
      6 HW-BMH-C1808080-C30 800*800*800     ≤1 0到-1Pa DN25 KF接口 軟管接頭Φ13 可選
      7 HW-BMH-C1100100100-C30 1000*1000*1000     ≤1 0到-1Pa DN25 KF接口 軟管接頭Φ13 可選
       
      聯系人:
      手機號碼:
      電子郵件:
      采購意向描述:
      二維碼:
       
      展開